Entrance Gates (wide & narrow)

• The timber is machined to a standard size, stop chamfered and planed
• All joints are morticed and tenoned
• All rail and cross bracings are bolted with stainless steel bolts
• Traditional attractive designs
• Also know as driveway gates.

Please note we only supply in natural Jakcured finish, but it is shown in some of our images painted white, as this is how many people like to see it finished.

Entrance Gates (wide)

Specification (1.8 – 3.6m wide)
Gates are 1.2m high except for the hanging stile which is 1.5m. Hanging Stile 125 x 75mm, Slam Stile 75 x 75mm, Top Rail is 100 x 75mm and under rail and cross braces 75 x 25mm. Supplied in natural Jakcured finish.

Right hand hanging when viewed from the front (opposite hanging available at no additional cost). Entrance gates are not stocked items, they are made to order.

Entrance Gates (narrow)

Specification (0.9 – 1.5m wide)
Single cross braced. Gates are 1.2m high except for the curved hanging stile which is 1.5m and slam stile 75 x 75mm. Top rail is 100 x 75mm.

Left hand hanging when viewed from the front.
(opposite hanging available at no additional cost).

Universal Timber Field or Drive Gate

• Our Uni-Gates are called this as they are ‘Universal’ which means they can be hung as right or left handed
• Designed with heavy top rail over entire width for extra strength
• Both hanging and slam stiles are drilled to allow gates to be hung on the left or right
• New Planed finish
• Rail and brace crossings are bolted with stainless steel bolts
• Top bars are chamfered
• Cross braced for extra strength
• All joints are morticed and tenoned
• Commonly used as driveway gates or field gates.

Uni-Gates

Specification (0.9 – 4.2m wide)
Gates are 1.27m high overall. Top rail 100mm x 75mm, under rail and cross braces 75 x 25mm. Hanging and slam stiles (rounded top) 100 x 75mm. With both stiles drilled to allow gates to be hung on the left or the right.
Supplied in natural Jakcured finish.